Structural elucidation and anti-psoriasis activity of a novel polysaccharide from Saussurea Costus.

PSCP, a novel water-soluble polysaccharide, was extracted from the root of Saussurea costus and subsequently purified using DEAE-52 cellulose and Sephadax G-50 columns. The elucidation of its structure involved various techniques including HPGPC, FT-IR, HPLC-ELSD, GC-MS, NMR, AFM, and SEM. The results show that PSCP was a homogeneous heteropoly saccharide having molecular weight of 4131 Da and mainly composed of 1-α-D-Glcp-(-2-ß-D-Fruf-1-)23-2-ß-D-Fruf. The anti-psoriasis activity of PSCP was evaluated in imiquimod-induced psoriasis in Balb/C mice. This study revealed that treatment with PSCP resulted in a significant improvement in the pathological morphology of the skin and a reduction in the PASI score. Analysis of liver RNA-Seq data indicated that the MAPK signaling pathway may play a crucial role in the ability of PSCP to ameliorate psoriasis. PSCP was found to effectively inhibit the phosphorylation of JNK, ERK, and p38, as well as down-regulate the expression of the transcription factor AP-1 (c-fos and c-jun) in the nucleus, thereby reducing the expression of inflammatory factors. These findings suggest that PSCP holds promise as a novel therapeutic approach for the treatment of psoriasis.

Validating an Ultrasonographical Assessment Tool for Predicting Difficult Laparoscopic Cholecystectomy in a Tertiary Care Hospital.

BACKGROUND: Laparoscopic cholecystectomy (LC) is the preferred treatment option in non-complicated symptomatic cholelithiasis. In some cases, the surgery might be complicated by different factors resulting in difficult LC. Ultrasound remains the first-line modality for diagnosing symptomatic cholelithiasis; however, its role in predicting difficult LC remains unclear. The aim of this study was to validate an ultrasonographic scoring system in predicting difficult LC. METHODS: We prospectively enrolled patients undergoing LC in a tertiary care unit over six months. All adult (≥18 years) patients undergoing LC for symptomatic cholelithiasis were included. Patients were excluded if they refused to consent, and those who underwent cholecystectomy for indications other than cholelithiasis. Patients were stratified into two groups based on intra-operative difficulty (easy LC and difficult LC) and were compared. Our primary outcome was radiologic difficulty among these groups. Univariate analysis and kappa statistics were performed. RESULTS: We identified 68 patients with an overall mean (SD) age of 42.2 (12.3) years, a mean (SD) weight of 74.1 (10.9) kg, and 73.5% were female. Of the study cohort, 52 patients had easy LC and 16 patients experienced difficult LC. Amongst the total, 14.7% suffered from diabetes mellitus, 29.4% had hypertension, 7.4% had a known ischemic heart disease, and 63% had a body mass index (BMI) ≥30 kg/m2 with no statistically significant difference between the two groups. On the Chi-square test, there was no statistical difference between the two groups in terms of ultrasonographic difficulty (p>0.05). However, we found a Kappa value of -0.127 (p=0.275) corresponding to a strong disagreement between the intraoperative and ultrasonographic difficulty. CONCLUSION: Despite its role in diagnosing cholelithiasis, an ultrasonographic assessment did not have a role in predicting difficult LC according to the present study. Further studies are required to develop a scoring system for predicting difficult LC based on clinical, laboratory, and ultrasonographic assessment.

Unveiling the significance of foliar-applied silicon, selenium and phosphorus for the management and remediation of arsenic in two different rice genotypes.

Under paddy soil conditions, rice plants are vulnerable to arsenic (As) accumulation, thus causing potential threat to human health. Here we investigated the influence of foliar-applied phosphorus (P: 10 and 20 mg L-1), silicon (Si: 0.6 and 1.5 g L-1) and selenium (Se: 5 and 10 mg L-1) on As accumulation, morphological and physiological attributes of two contrasting rice genotypes (KSK-133 and Super Basmati) under As stress (25 mg kg-1 as arsenate). Silicon foliar dressing significantly (p < 0.05) reduced grain As uptake (up to 67%) and improved rice growth and chlorophyll content (28-66%) in both rice genotypes over their controls. Phosphorus foliar application resulted in a notable decrease (17%) in grain As uptake of coarse rice genotype (KSK-133), while it slightly increased grain As uptake in the fine one (Super Basmati; 6%) compared to controls. However, foliar-applied Se did not show significant effects on rice plants growth attributes and As uptake in both genotypes. Similarly, biochemical and enzymatic attributes (i.e., lipid peroxidation, electrolyte leakage, peroxidase and catalase) were improved with Si application in rice plants, except for P treatment that was only effective for coarse one. Foliar-applied Si also resulted in reduced cancer risk and hazard quotient (< 0.10) for both rice genotypes. This study advances our understanding on critical role of different foliar-applied nutrients and rice genotypes, which is imperative to develop effective As remediation and management strategies in coarse and fine rice genotypes and protect human health.

This study provided new insights on the significance of foliar-applied phosphorus, silicon and selenium for the management and remediation of arsenic in fine (Super Basmati) and coarse (KSK-133) rice genotypes. Foliar-applied silicon was the most promising strategy to mitigate arsenic uptake and minimizing health risk in rice grain of both genotypes, while phosphorus was effective only for coarse one, thus showing a genotype dependent response. Interestingly, selenium foliar application had no significant effect on arsenic accumulation in both rice genotypes.

The evaluation of bacterial-augmented floating treatment wetlands for concomitant removal of phenol and chromium from contaminated water.

Contamination of aquatic ecosystems with organic and inorganic contaminants is a global threat due to their hazardous effects on the environment and human health. Floating treatment wetland (FTW) technology is a cost-effective and sustainable alternative to existing treatment approaches. It consists of a buoyant mat in which wetland plants can grow and develop their roots in a suspended manner and can be implemented to treat stormwater, municipal wastewater, and industrial effluents. Here we explored the potential of bacterial-augmented FTWs for the concurrent remediation of phenol and hexavalent chromium (Cr6+) contaminated water and evaluated treated water toxicity using Triticum aestivum L. (wheat) as a test plant. The FTWs carrying Phragmites australis L. (common reed) were inoculated with a consortium of four bacterial strains (Burkholderia phytofirmans PsJN, Acinetobacter lwofii ACRH76, Pseudomonas aeruginosa PJRS20, Bacillus sp. PJRS25) and evaluated for their potential to simultaneously remove phenol and chromium (Cr) from contaminated water. Results revealed that the FTWs efficiently improved water quality by removing phenol (86%) and Cr (80%), with combined use of P. australis and bacterial consortium after 50 days. The phytotoxicity assay demonstrated that the germination of wheat seed (96%) was significantly higher where bacterial-augmented FTWs treated water was used compared to untreated water. This pilot-scale study highlights that the combined application of wetland plants and bacterial consortium in FTWs is a promising approach for concomitant abatement of phenol and Cr from contaminated water, especially for developing countries like Pakistan where the application of advanced and expensive technologies is limited.

This pilot-scale research provides new interventions and information required for establishing a large-scale remediation framework for the effective, sustainable and eco-friendly remediation of phenol and Cr co-contaminated aquatic ecosystems, using bacterial augmented floating wetlands technology (FTWs).

Morphological, Biochemical, and Molecular Characterization of Exotic Brassica Germplasm.

Oilseed rape (Brassica napus L.) is an important oilseed crop. We examined the diversity of germplasm expressed at three distinct levels (i.e., morphological, biochemical, and DNA levels). In this study, 150 B. napus L. accessions with three check varieties were provided by Bioresources Conservation Institute. The germplasm was grown in field conditions for data collection of 15 quantitative and nine qualitative agro-morphological traits. The result indicated that for 15 quantitative agro-morphological traits, the highest coefficient of variation was recorded for plant height and days to flowering initiation. For nine qualitative traits, most of the accessions have a spatulate leaf, brown color seeds, yellow flowers, and erect silique attitude. The best adoptable genetically diverse exotic Brassica germplasms were selected, i.e., accessions 24178, 24881, 24199, 24214, 24242, and 24192. Based on biochemical analysis for high oil content and high oleic acid content, chakwal sarsoon and accession 24192 were selected. For high oleic and linoleic acids, accession 24181 performed best, for low erucic acid accessions 24177 and 24195. Based on molecular (SSR) markers, the top 50 selected genotypes were evaluated with 30 SSR markers. The 47 genotypes with three check varieties were clustered in six major groups; the coefficient of similarity ranged between 0.18 and 1.00. Based on SSR data, the germplasms accession 24178 and Abasin were the most diverse genotypes. These genotypes have the capacity and could be used in future breeding programs. High genetic variations were investigated through the SSR among the studied genotypes of Brassica napus L. The present study also concluded that SSR is a better technique for intraspecific genetic diversity. Other modern techniques should be applied such as SNIP for the investigation of a high level of genetic diversity among crop plants in the future.

Exploring the potential of bacterial-augmented floating treatment wetlands for the remediation of detergent-contaminated water.

Due to industrialization and urbanization, the use of detergents inadvertently led to contamination of aquatic environments, thus posing potential threat to aquatic organisms and human health. One of the main components of detergents is linear alkylbenzene sulfonate (LAS), which can cause toxic effects on living organisms, particularly aquatic life in the environment. In this study, floating treatment wetlands (FTWs) mesocosms were developed and augmented with LAS-degrading bacteria. The plant species, Brachiaria mutica (Para grass), was vegetated to establish FTWs and bacterial consortium (1:1:1:1) of Pseudomonas aeruginosa strain PJRS20, Bacillus sp. BRRH60, Acinetobacter sp. strain CYRH21, and Burkholderia phytofirmans Ps.JN was augmented (free or immobilized) in these mesocosms. Results revealed that the FTWs removed LAS from the contaminated water and their augmentation with bacteria slightly increased LAS removal during course of the experiment. Maximum reduction in LAS concentration (94%), chemical oxygen demand (91%), biochemical oxygen demand (93%), and total organic carbon (91%) was observed in the contaminated water having FTWs augmented with bacterial consortium immobilized on polystyrene sheet. This study highlights that the FTWs supported with immobilized bacteria on polystyrene sheets can provide an eco-friendly and sustainable solution for the remediation of LAS-bearing water, especially for developing countries like Pakistan.

This pilot-scale study provided insights to resolve the detergent-contaminated wastewater issue, using floating treatment wetlands (FTWs) augmented with bacteria. The FTWs augmented with bacteria immobilized on a polystyrene sheet and vegetated with Brachiaria mutica led to high degradation of LAS, a toxic compound of detergent, from the contaminated water.

Mg-Doped PLA Composite as a Potential Material for Tissue Engineering-Synthesis, Characterization, and Additive Manufacturing.

Magnesium (Mg)/Polylactic acid (PLA) composites are promising materials for bone regeneration and tissue engineering applications. PLA is a biodegradable and biocompatible polymer that can be easily processed into various shapes and structures, such as scaffolds, films, and fibers, but has low biodegradability. Mg is a biocompatible metal that has been proven to have good biodegradability and osteoconductivity, which makes it suitable for bone tissue engineering. In this study, we prepared and characterized a Mg/PLA composite as a potential material for direct ink writing (DIW) in 3D printing. The results showed that the addition of Mg has a significant impact on PLA's thermal and structural properties and has also significantly increased the degradation of PLA. XRD was used to determine the degree of crystallinity in the PLA/Mg composite, which provides insight into its thermal stability and degradation behavior. The crystallization temperature of PLA increased from 168 to 172 °C for a 15 wt% Mg incorporation, and the melting temperature reduced from 333 °C to 285 °C. The surface morphology and composition of these films were analyzed with SEM. The films with 5 wt% of Mg particles displayed the best-ordered honeycomb structure in their film form. Such structures are considered to affect the mechanical, biological and heat/mass transfer properties of the Mg/PLA composites and products. Finally, the composite ink was used as a feed for direct ink writing in 3D printing, and the preliminary 3D printing experiments were successful in resulting in dimensionally and structurally integral scaffold samples. The shape fidelity was not very good, and some research is needed to improve the rheological properties of the ink for DIW 3D printing.

Several Zagreb indices of power graphs of finite non-abelian groups.

Molecular topology can be described by using topological indices. These are quantitative measures of the essential structural features of a proposed molecule calculated from its molecular structure. It is a numerical value obtained from a molecular configuration that reflects the significant physical characteristics of the suggested molecule. Numerous physical properties, chemical reactivity, and biological activity are correlated with the chemical composition using an algebraic number. The power graph P(G) of a finite group G is a graph whose vertex set is G and in which two distinct vertices are connected by an edge when one element is an integral power of the other. This article investigates a wide range of degree-based topological descriptors for power graphs of various finite groups. We find numerous Zagreb indices (given in Table 1) of power graphs of finite non-cyclic and cyclic groups, dihedral, and generalized quaternion groups.

Performance of solar roof top panels with disparate particulate accumulation: Exergy analysis on an indoor lab study.

Deployment of solar photovoltaic panels are significantly rising to tackle adverse effects of climate change however, factors affecting output need to be categorized in addition to latitude angle and space. It is important to consider the atmospheric impact which can drastically change output power of solar panels. This study covers dust accumulation of soil, sand and ash at variable weights to foresee its effects on panel power output. Mixtures of these particles at multiple constituents were also analyzed. Experimental results indicated that clean panel gives maximum power output of 21.37W and exergy efficiency of 7.96% whereas ash accumulation showed worst results of 2.88W power output and 1.07% exergy efficiency at 700W/m2 and 50g dust accumulation. Other parameters like energy destruction, exergy losses and sustainability index were also analyzed. Trends have been illustrated in graphs along with the change in solar intensity and dust accumulations.

Refractory immune thrombocytopenic purpura (ITP) after accessory splenectomy: A case report and literature review.

Immune thrombocytopenic purpura (ITP) is an autoimmune disorder characterized by a platelet count of less than 100 x 109 /L, resulting from antibody-mediated platelet destruction. Treatment for ITP typically involves steroids, and intravenous immunoglobulins (IVIG) can be added. Splenectomy is performed in cases with refractory ITP. Rituximab can suppress immunity but has limited efficacy in ITP cases. Herein, we present a rare case of a 30-year-old female who was first diagnosed with ITP and underwent a splenectomy two years later. However, seven years after surgery, she was presented with symptoms of ITP. A splenic scan showed an accessory spleen in the spleen bed, for which she underwent accessory spleen removal surgery. Her laboratory tests three days post-operation showed a rise in platelet count and hence was discharged a few days later. The patient had recurrent attacks of ITP even after the removal of the normal and accessory spleen, suggesting that accessory spleen removal may not always be an effective treatment for ITP. The patient eventually died. While splenectomy is a common treatment for ITP, it may not always be effective in all cases, and other treatments such as bone marrow transplantation may be necessary.

Compliance With the World Health Organization Surgical Safety Checklist at a Tertiary Care Hospital: A Closed Loop Audit Study.

BACKGROUND AND OBJECTIVE: The WHO launched the "Safe Surgery Saves Lives" campaign in 2008 to improve patient safety during surgery. The campaign includes the use of the WHO Surgical Safety Checklist, which has been proven effective in reducing complications and mortality rates in several studies. This article discusses a clinical audit at a tertiary healthcare facility that assesses compliance with all three components of the checklist to minimize errors and improve safety standards. MATERIALS AND METHODS: This prospective, observational, closed-loop clinical audit study was conducted at Hayatabad Medical Complex, a tertiary care public sector hospital located in Peshawar, Pakistan. The audit aimed to assess compliance with the WHO Surgical Safety Checklist. The first phase of the audit cycle commenced on October 5, 2022, and involved collecting data from 91 surgical cases in randomly selected operating rooms. Following the completion of the first phase on December 13, 2022, an educational intervention was then conducted on December 15 to underscore the significance of adhering to the checklist, and the second phase of data collection began the following day, ending on February 22, 2023. The results were analyzed using SPSS Statistics version 27.0. RESULTS: The first phase of the audit showed that there was poor compliance with the latter two parts of the checklist. Certain components of the WHO Surgical Safety Checklist were well-complied with, including patient identity confirmation (95.6%), obtaining informed consent (94.5%), and counting of sponges and instruments (95.6%), while the lowest compliance rates were in recording allergies (26.3%), assessing blood loss risk (15.3%), introducing team members (62.6%), and inquiring about patient recovery concerns (64.8%, 34%, and 20.8% for surgeons, anesthetists, and nurses, respectively). In the second phase, after an educational intervention, compliance with the checklist improved significantly, particularly for those components with low compliance rates in the first phase, marking recording allergies (89.0%), introducing team members 91.2%), and inquiring about patient recovery concerns (79.1%, 73.6%, and 70.3% for surgeons, anesthetists, and nurses, respectively). CONCLUSION: The study showed that education is a critical factor in improving compliance with the WHO Surgical Safety Checklist. The study suggests that overcoming the obstacles to implementing the checklist requires a collaborative environment and effective instruction. It emphasizes the importance of adhering to the checklist in all surgical settings.

Emodin alleviates chronic constriction injury-induced neuropathic pain and inflammation via modulating PPAR-gamma pathway.

Neuropathic pain has been characterized as chronic pain resulting from pathological damage to the sensorimotor system. Because of its complex nature, it remains refractory to most of the therapeutic interventions, and surgical intervention and physiotherapy alongside steroidal treatments remain the only treatment protocols with limited success, hence solidifying the need to find efficacious therapeutic alternatives. Emodin was used as a post-treatment for its potential to be neuroprotective in the treatment of chronic constriction injury-induced NP. The first day following surgery, Emodin treatment began, and it lasted until the 21st day. On days 3, 7, 14 and 21, all behavioral investigations were conducted. The sciatic nerve and spinal cord were extracted for further molecular examination. Emodin elevated response latency, was able to delay the onset of mechanical hyperalgesia in rats on days 7, 14, and 21 and reduced the CCI-induced paw deformation. Emodin treatment significantly reduced lipid peroxidation and NO levels while restoring the GST, GSH and catalase. It significantly improved the disorientation of the sciatic nerve and spinal cord confirmed by H & E staining and reduced inflammatory markers as observed by the quantification of COX-2, TNF-α, p-NFκb and up-regulated PPAR-γ levels by ELISA and PCR. According to the findings, Emodin has antinociceptive and anti-hyperalgesic properties, which reduced pain perception and inflammation. We also suggested the involvement of PPAR-γ pathway in the therapeutic potential of emodin in chronic nerve injury.

3D-Printable PLA/Mg Composite Filaments for Potential Bone Tissue Engineering Applications.

Magnesium (Mg) is a promising material for bone tissue engineering applications due to it having similar mechanical properties to bones, biocompatibility, and biodegradability. The primary goal of this study is to investigate the potential of using solvent-casted polylactic acid (PLA) loaded Mg (WE43) composites as filament feedstock for fused deposition modeling (FDM) 3D Printing. Four PLA/Magnesium (WE43) compositions (5, 10, 15, 20 wt%) are synthesized and produced into filaments, then used to print test samples on an FDM 3D printer. Assessments are made on how Mg incorporation affected PLA's thermal, physicochemical, and printability characteristics. The SEM study of the films shows that the Mg particles are uniformly distributed in all the compositions. The FTIR results indicate that the Mg particles blend well with the polymer matrix and there is no chemical reaction between the PLA and the Mg particles during the blending process. The thermal studies show that the addition of Mg leads to a small increase in the melting peak reaching a maximum of 172.8 °C for 20% Mg samples. However, there are no dramatic variations in the degree of crystallinity among the Mg-loaded samples. The filament cross-section images show that the distribution of Mg particles is uniform up to a concentration of 15% Mg. Beyond that, non-uniform distribution and an increase in pores in the vicinity of the Mg particles is shown to affect their printability. Overall, 5% and 10% Mg composite filaments were printable and have the potential to be used as composite biomaterials for 3D-printed bone implants.

Exploration of plant growth promoting traits and regulatory mechanisms of Bacillus anthracis PM21 in enhancing salt stress tolerance in maize.

Bacillus species have been reported to reduce the negative effects of salt stress on plants; the involvement of Bacillus anthracis PM21 and the internal mechanisms involved in this process are unclear. The effects of PM21 inoculation on maize plants under salt stress were investigated in this study. The study aimed to assess the ability of Bacillus anthracis PM21 to endure high levels of salinity stress while preserving the concentration of plant growth regulators. The biomass, photosynthetic pigments, relative water content (RWC), antioxidants, osmoprotectants, inorganic ion contents, regulation of plant hormones and expression of antioxidants enzyme encoded genes were investigated under normal and salinity stress conditions. Bacillus anthracis PM21 produced a significant amount of 1-aminocyclopropane-1-carboxylate deaminase enzyme (ACC deaminase) and exopolysaccharides (EPS) under salt stress and normal conditions. PM21 also produced plant growth stimulants including indole acetic acid, gibberellic acid (GA3), kinetin, and siderophore under salinity stress and normal conditions. Under salt stress, PM21 inoculation markedly increased plant growth indices, stimulate antioxidant enzyme mechanisms, osmoprotectants, and chlorophyll content. The use of qRT-PCR to analyze the transcription of targeted genes indicated greater expression of antioxidant-encoded genes and inferred their possible function in salinity stress tolerance. Our findings shed light on the functions of PM21 and its regulatory mechanisms in plant salt stress tolerance, as well as the importance of PM21 in this process. This study will provide a thorough analysis of the theoretical framework for adopting PM21 in agricultural production as an eco-friendly method to enhance crop growth and yield under salinity stress.

Community-Acquired Skin and Soft Tissue Infections: Epidemiology and Management in Patients Presenting to the Emergency Department of a Tertiary Care Hospital.

BACKGROUND: Skin and soft tissue infections are one of the most common diseases presenting to the emergency department (ED). There is no study available on the management of Community-Acquired Skin and Soft Tissue Infections (CA-SSTIs) in our population recently. This study aims to describe the frequency and distribution of CA-SSTIs as well as their medical and surgical management among patients presenting to our ED. METHODS: We conducted a descriptive cross-sectional study on patients presenting with CA-SSTIs to the ED of a tertiary care hospital in Peshawar, Pakistan. The primary objective was to estimate the frequency of common CA-SSTIs presenting to the ED and to assess the management of these infections in terms of diagnostic workup and treatment modalities used. The secondary objectives were to study the association of different baseline variables, diagnostic modalities, treatment modalities, and improvement with the surgical procedure performance for these infections. Descriptive statistics were obtained for quantitative variables like age. Frequencies and percentages were derived for categorical variables. The chi-square test was used to compare different CA-SSTIs in terms of categorical variables like diagnostic and treatment modalities. We divided the data into two groups based on the surgical procedure. A chi-square analysis was conducted to compare these two groups in terms of categorical variables. RESULTS: Out of the 241 patients, 51.9% were males and the mean age was 34.2 years. The most common CA-SSTIs were abscesses, infected ulcers, and cellulitis. Antibiotics were prescribed to 84.2% of patients. Amoxicillin + Clavulanate was the most frequently prescribed antibiotic. Out of the total, 128 (53.11%) patients received some type of surgical intervention. Surgical procedures were significantly associated with diabetes mellitus, heart disease, limitation of mobility, or recent antibiotic use. There was a significantly higher rate of prescription of any antibiotic and anti-methicillin-resistant Staphylococcus aureus (anti-MRSA) agents in the surgical procedure group. This group also saw a higher rate of oral antibiotics prescription, hospitalization, wound culture, and complete blood count. CONCLUSION: This study shows a higher frequency of purulent infections in our ED. Antibiotics were prescribed more frequently for all infections. Surgical procedures like incision and drainage were much lower even in purulent infections. Furthermore, beta-lactam antibiotics like Amoxicillin-Clavulanate were commonly prescribed. Linezolid was the only systemic anti-MRSA agent prescribed. We suggest physicians should prescribe antibiotics appropriate to the local antibiograms and the latest guidelines.

Comparative Proteomics and Genome-Wide Druggability Analyses Prioritized Promising Therapeutic Targets against Drug-Resistant Leishmania tropica.

Leishmania tropica is a tropical parasite causing cutaneous leishmaniasis (CL) in humans. Leishmaniasis is a serious public health threat, affecting an estimated 350 million people in 98 countries. The global rise in antileishmanial drug resistance has triggered the need to explore novel therapeutic strategies against this parasite. In the present study, we utilized the recently available multidrug resistant L. tropica strain proteome data repository to identify alternative therapeutic drug targets based on comparative subtractive proteomic and druggability analyses. Additionally, small drug-like compounds were scanned against novel targets based on virtual screening and ADME profiling. The analysis unveiled 496 essential cellular proteins of L. tropica that were nonhomologous to the human proteome set. The druggability analyses prioritized nine parasite-specific druggable proteins essential for the parasite's basic cellular survival, growth, and virulence. These prioritized proteins were identified to have appropriate binding pockets to anchor small drug-like compounds. Among these, UDPase and PCNA were prioritized as the top-ranked druggable proteins. The pharmacophore-based virtual screening and ADME profiling predicted MolPort-000-730-162 and MolPort-020-232-354 as the top hit drug-like compounds from the Pharmit resource to inhibit L. tropica UDPase and PCNA, respectively. The alternative drug targets and drug-like molecules predicted in the current study lay the groundwork for developing novel antileishmanial therapies.

The role of various ameliorants on geochemical arsenic distribution and CO2-carbon efflux under paddy soil conditions.

Climate change is a global challenge that is accelerated by contamination with hazardous substances like arsenic (As), posing threat to the agriculture, ecosystem and human health. Here, we explored the impact of various ameliorants on geochemical distribution of As in two soils with contrasting textures (sandy clay loam (Khudpur Village) and clay loam (Mattital Village)) under paddy soil conditions and their influence on the CO2-carbon efflux. The exchangeable As pool in clay loam soil increased as: lignite (0.4%) < biogas slurry (6%) < cow dung (9%), and < biochar (20%). However, in the sandy clay loam soil exchangeable soil As pool was found to be maximum with farmyard manure followed by biogas slurry, biochar and cow dung (17%, 14%, 13% and 7%, respectively). Interestingly, in the sandy clay loam soil the percentage As distribution in organic fraction was: biochar (38%) > cow dung (33%) > biogas slurry (23%) > sugarcane bagasse (22%) > farmyard manure (21%) that was higher compared to the clay loam soil (< 6% for all the amendments). In addition to the highest As immobilization by biochar in sandy clay loam soil, it also led to the lowest CO2-carbon efflux (1470 CO2-C mg kg-1) among all the organic/inorganic amendments. Overall, the current study advances our understanding on the pivotal role of organic amendments, notably biochar, in immobilizing As under paddy soil conditions with low (CO2) carbon loss, albeit it is dependent on soil and ameliorant types.

3D Printed Polymer Piezoelectric Materials: Transforming Healthcare through Biomedical Applications.

Three-dimensional (3D) printing is a promising manufacturing platform in biomedical engineering. It offers significant advantages in fabricating complex and customized biomedical products with accuracy, efficiency, cost-effectiveness, and reproducibility. The rapidly growing field of three-dimensional printing (3DP), which emphasizes customization as its key advantage, is actively searching for functional materials. Among these materials, piezoelectric materials are highly desired due to their linear electromechanical and thermoelectric properties. Polymer piezoelectrics and their composites are in high demand as biomaterials due to their controllable and reproducible piezoelectric properties. Three-dimensional printable piezoelectric materials have opened new possibilities for integration into biomedical fields such as sensors for healthcare monitoring, controlled drug delivery systems, tissue engineering, microfluidic, and artificial muscle actuators. Overall, this review paper provides insights into the fundamentals of polymer piezoelectric materials, the application of polymer piezoelectric materials in biomedical fields, and highlights the challenges and opportunities in realizing their full potential for functional applications. By addressing these challenges, integrating 3DP and piezoelectric materials can lead to the development of advanced sensors and devices with enhanced performance and customization capabilities for biomedical applications.

Additive Manufacturing of Polymer/Mg-Based Composites for Porous Tissue Scaffolds.

Due to their commercial availability, superior processability, and biocompatibility, polymers are frequently used to build three-dimensional (3D) porous scaffolds. The main issues limiting the widespread clinical use of monophasic polymer scaffolds in the bone healing process are their inadequate mechanical strength and inappropriate biodegradation. Due to their mechanical strength and biocompatibility, metal-based scaffolds have been used for various bone regenerative applications. However, due to the mismatch in mechanical properties and nondegradability, they lack integration with the host tissues, resulting in the production of fiber tissue and the release of toxic ions, posing a risk to the durability of scaffolds. Due to their natural degradability in the body, Mg and its alloys increasingly attract attention for orthopedic and cardiovascular applications. Incorporating Mg micro-nano-scale particles into biodegradable polymers dramatically improves scaffolds and implants' strength, biocompatibility, and biodegradability. Polymer biodegradable implants also improve the quality of life, particularly for an aging society, by eliminating the secondary surgery often needed to remove permanent implants and significantly reducing healthcare costs. This paper reviews the suitability of various biodegradable polymer/Mg composites for bone tissue scaffolds and then summarizes the current status and challenges of polymer/magnesium composite scaffolds. In addition, this paper reviews the potential use of 3D printing, which has a unique design capability for developing complex structures with fewer material waste at a faster rate, and with a personalized and on-site fabrication possibility.

Pharmacological basis of bergapten in gastrointestinal diseases focusing on H+/K+ ATPase and voltage-gated calcium channel inhibition: A toxicological evaluation on vital organs.

Aim and objectives: This study aimed to establish a pharmacological basis for evaluating the effects of bergapten (5-methoxypsoralen) in gastrointestinal diseases and assessment of its toxicological profile. Methods: The pharmacokinetic profile was evaluated using the SwissADME tool. AUTODOCK and PyRx were used for evaluating the binding affinities. The obtained results were further investigated for a post-dock analysis using Discovery Studio Visualizer 2016. The Desmond software package was used to conduct molecular dynamic simulations of best bound poses. Bergapten was further investigated for antidiarrheal, anti-secretory, charcoal meal transit time, anti-ulcer, anti-H. pylori activity. Results: Bergapten at a dose of 50, 100, and 200 mg/kg was proved effective in reducing diarrheal secretions, intestinal secretions, and distance moved by charcoal meal. Bergapten at the aforementioned doses acts as a gastroprotective agent in the ethanol-induced ulcer model that can be attributed to its effectiveness against H. pylori. Bergapten shows concentration-dependent relaxation of both spontaneous and K+ (80 mM)-induced contractions in the isolated rabbit jejunum model; the Ca2+ concentration-response curves (CRCs) were shifted to the right showing potentiating effect similar to papaverine. For molecular investigation, the H+/K+ ATPase inhibitory assay indicated inhibition of the pump comparable to omeprazole. Oxidative stress markers GST, GSH, and catalase showed increased expression, whereas the expression of LPO (lipid peroxidation) was reduced. Histopathological examination indicated marked improvement in cellular morphology. ELISA and western blot confirmed the reduction in inflammatory mediator expression. RT-PCR reduced the mRNA expression level of H+/K+ ATPase, confirming inhibition of the pump. The toxicological profile of bergapten was evaluated by an acute toxicity assay and evaluated for behavioral analysis, and the vital organs were used to analyze biochemical, hematological, and histopathological examination. Conclusion: Bergapten at the tested doses proved to be an antioxidant, anti-inflammatory, anti-ulcer, and antidiarrheal agent and relatively safe in acute toxicity assay.